For the special requirements of the laboratory. Set of three markers with three different colors: black, blue, and red. Bullet nib. Specially designed for surfaces of laboratory equipment such as slides, reaction vessels, labware and labels. Ink with high resistance to alcohol (can only be erased with strong friction) and water, but erasable with acetone and xylene
Gives a better insight to students into the three dimensional aspects of molecules and chemical compounds. The sets consists of colored plastic balls in different diameters and follows a universal color code in representing various elements. The balls have one or more holes and may be inter-connected to each other by white plastic unions that represent valency bonds and the structures so formed represent molecules or compounds. See the detailed technical sheet of this product on our website www.labbox.com
Self-adhesive tape with impregnated paper turning to colour (from white to dark brown) when exposed to sterilization process. Intended use: with individual units, to show that they have been exposed to the sterilization process, as well as to distinguish between processed and unprocessed units. Not intended for use as a sterilization process validation system. Suitable for the following steam sterilization processes: 15 minutes at 121 °C or 3 minutes at 134 °C or 18 minutes at 134 °C. Minimum color change conditions: 10 minutes at 121 °C or 2 minutes at 134 °C. Storage conditions after use: temperature between 15 and 30 °C; relative humidity between 30 and 70%. Shelf life: maximum 18 months
To label all kind of laboratory containers. Resistant to water and most solvents and acids. Can be used in autoclave, freezer, refrigerator and oven. Temperature range: -23 °C to +121 °C. To label with pencil, pen or marker. Does not leave residues when removed. Internal roll diameter 76 mm
Used for storing, dispensing and cutting Parafilm®M. Made of white acrylic. Can hold both 5 cm and 10 cm rolls, tapes and labels. Can easily cut thanks to super sharp serrated blades. Openable top lid allows easy replacement of the paraflim rolls. The dispenser does not include Parafilm
For the special requirements of the laboratory. Available in black. Bullet nib. Fine nib for clear labelling on small surfaces. Particularly suited for smooth and transparent surfaces e.g. slides, reaction vessels, labware and labels. Quick-drying, smudge-proof, waterproof, lightfast and low-odour. Extreme resistance to abrasion and high temperatures-tested and approved by TÃœV Saarland. Permanent on plastic, erasable in glass with alcohol-based cleaner
Sealing film made of polyolefines and paraffin waxes. Service temperature from –45 ºC up to +50 ºC (melting point +60 ºC). Resistant to saline solutions, most common inorganic acids and bases used in laboratory and some organics solvents (methanol, ethanol and 2-propanol). Not resistant to diethylether, chloroform, carbon tetrachloride, benzene or toluene.
