Made of reinforced nylon. Molded in a single piece for exceptional strength and durability. Stackable. With alphanumeric marking on the top. End plates accept large labels for easy identification of samples. Does not float or turn over in a water bath. Good chemical resistance. Available in various attractive colors to help keep samples organized. No assembly is required, rack is ready to use
Contains one unit of each of the following capacities: 10, 25, 50, 100, 250, 500 and 1000 ml. Made of borosilicate glass LBG 3.3 and designed according to ISO 4788. Calibrated to contain (TC, In). Batch certificate included (to be downloaded free of charge <a href="https://ien.labbox.com/download-certificates/" target="_blank">here)</a>
Made of polypropylene with silicone-rubber lined cap. Conical bottom and skirt. With exterior screw. Can withstand temperatures from -70 ºC up to 120 ºC
Made of highly resistant polyethylene (FDA-approved). Easy-to-close bags with puncture-proof tabs for protection from possible damage due to wire-end punctures. Ideal for chlorinated water samples, with thiosulfate tablets (10 mg / 100 ml), to perform bacterial testing. Maximum bag mouth opening and write-on strip and volume markings for measurements. DNase, RNase and pyrogen free
Non-contact infrared thermometer, designed to measure body temperature by heat emitted from the forehead and for measuring temperature on objects. Body mode, surface mode and room mode. High temperature or fever alarm. Coloured display depending on obtained temperature value (green, orange or red). Storage of the last 32 readings. Auto power off. Large screen with backlight. Celsius or Fahrenheit degrees. Effective measurement distance: 3-5 cm. Range in human body: 32,0-43,0 ºC. Accuracy (35,0-42,0 ºC): ± 0,2 ºC. Resolution: 0,1 ºC. Measurement time <30 seconds. Power: 2 AA batteries (included). Council Directive 93/42 / EEC of June 14, 1993, relating to medical devices. Classification: Class IIa Medical Device. CE certified. Warranty 2 years
Attachable C-mount digital camera for microscopy with USB 3.1 output. Only compatible with trinocular port. Calibration slide included. Motic Images Plus 3.0 Software for image capture and edition with Windows (multilanguages software, English included) and Mac (only in English). 2 years warranty. Delivery time 2 weeks
Used for the filtration of culture media and other biological fluids. Upper cup made of ABS, central neck and lid made of polypropylene. Compatible with 50 ml centrifuge tubes. Maximum usage temperature: 45 ºC. Sterilized by beta irradiation and free of DNase, RNase and pyrogens. Lids included. Packaged in individual bags. Certificate of sterilization included (to be downloaded free of charge here)
Self-adhesive tape with impregnated paper turning to colour (from white to dark brown) when exposed to sterilization process. Intended use: with individual units, to show that they have been exposed to the sterilization process, as well as to distinguish between processed and unprocessed units. Not intended for use as a sterilization process validation system. Suitable for the following steam sterilization processes: 15 minutes at 121 °C or 3 minutes at 134 °C or 18 minutes at 134 °C. Minimum color change conditions: 10 minutes at 121 °C or 2 minutes at 134 °C. Storage conditions after use: temperature between 15 and 30 °C; relative humidity between 30 and 70%. Shelf life: maximum 18 months
