For general laboratory use. Medium flow rate. Weight 65 g/m², thickness 180 μm, filtration time 30 s, retention 7 – 10 μm, wet bursting strength >30 kPa, ash content max. 0,1%. Available in discs (presented in packages of 100 discs in a box). Equivalence: Whatman 93
Made of top quality 3.3 borosilicate glass. This equipment is composed of 1 Vigreux column of 320 mm, 1 Liebig West, straight-shape condenser of 250 mm, 1 round bottom flask of 250 ml, 1 bent connecting adapter with thermometer adapter, 1 bent distillation adapter, 1 thermometer (-10 to +110 ºC) and all POM clips for 29/32 ground joints. Hose connector is designed for tubing Øinner 8 mm
Made of top quality 3.3 borosilicate glass. This equipment is composed of 1 Liebig West, straight-shape condenser 250 mm, 1 round bottom flask of 250 ml, 1 bent connecting adapter with thermometer adapter, 1 bent distillation adapter, 1 thermometer (-10 to +110 ºC) and all POM clips for 29/32 ground joints. Hose connector is designed for tubing Øinner 8 mm
Micropipettes of “Elite” series are the result of manufacturing with new and innovative materials. They offer a ligth and ergonomic design, clear and easy-to-read display with large numbers and small increments. Fully autoclavable at 121 °C without the need of disassembly. Intuitive operation with one hand. Easy calibration and maintenance. Besides each micropipette was individually calibrated according to EN-ISO 8655 standard, showing an embossed identifying serial number and delivered with a calibration report. Warranty 2 years
Reduced weight, ergonomic design and smooth pushing system to minimize hand and finger tiredness. Minimum bodyheat transfer to internal parts for high accuracy even during continuous use. Autoclavable tip cone. Tip ejection mechanism (except in EASD-10K-001). Accurate volume adjustment with an audible “click” signal to avoid mistakes. Each micropipette was individually calibrated according to EN-ISO 8655 standard, showing an embossed identifying serial number and delivered with a calibration report. See the spare parts available for these micropipettes on our website: www.labbox.com. 3 year warranty
Excellent chemical resistance. Made of borosilicate glass and and high chemical resistance materials. High reproducibility of the measurements. Re-circulable valve that prevents liquid leaks. Security lock. Includes calibration tool and 4 universal adapters for bottles. Easy to clean and maintain due to a springless valve design. This instrument is designed for dispensing liquids, under the following conditions of use: temperature range: 15 to 40 °C (instrument and reagent), vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and viscosity up to 500 mm²/s. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655. It has a unique serial number engraved and is delivered with a calibration certificate. Check the complete table of chemical compatibilities on our website www.labbox.com
Good chemical resistance. Made of PTFE, 3.3 borosilicate glass, polypropylene and FEP. High reproducibility of the volumes. The instrument can be screwed directly onto a GL 45 screwthread. For other bottles, use the accompanying adapters for the most common threads in laboratory bottles. Easy to clean and maintain. This instrument is designed for dispensing liquids, observing the following limits: temperature range: +15 to 40 °C of instrument and reagent, vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and the viscosity up to 500 mm²/s. Bottle not included. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655. Check the complete table of chemical compatibilities on our website www.labbox.com
For easy, secure and efficient liquid filling and delivery. An inner PTFE 0.45 ?m filter and a security valve prevent any liquid entrance in the device. The cone fixing the pipettes is autoclavable up to 121 ºC. Can be used with glass or plastic pipettes from 0.1 to 100 ml. Easy to use, ergonomical and one-hand control. Wall hanger device, internal rechargeable battery, spare 0,45 ?m PTFE filter and 0,2 ?m filter included. Warranty 1 year
Ergonomic and lightweight design, easy to handle with one hand. For easy, secure and efficient liquid filling and delivery. Can be used with glass or plastic pipettes from 0.1 to 100 ml. Autoclavable hydrophobic 0.45 ?m filter preventing excess aspiration. Warranty 2 years
To fill and dispense liquid in glass and plastic pipettes from 0.1 to 100 ml. Autoclavable silicone pipette holder. Includes an inner 3.0 µm spare part filter to prevent liquid entrance. Warranty 2 years
Designed according to ISO 385 and calibrated to deliver (TD, Ex). With funnel top to make filling easier and safer. Batch certificate included (to be downloaded free of charge <a href="https://ien.labbox.com/download-certificates/" target="_blank">here</a>)
